Voron 2.4 R2 · 350
Enclosed CoreXY with a flying gantry — the studio’s main production printer, built and tuned in-house.
Spec sheet
| Print bed | 350 × 350 mm |
|---|---|
| Colours | up to 6 per print (ERCF) |
| Motion | CoreXY · quad gantry levelling |
| Layer height | from 0.1 mm |
| Control | Klipper · Mainsail web interface |
| Print time logged | 2,300+ hours (July 2026) |
The Voron 2.4 is a self-sourced, self-built CoreXY printer: an enclosed frame, a gantry that levels itself on four independent Z motors, and a toolhead designed for high-temperature materials. Ours is the 350 mm version — the largest of the family.
Ours runs Klipper with the Mainsail web interface and carries an Enraged Rabbit Carrot Feeder (ERCF): that is how logos, faceplates and two-tone designs come off the bed in up to six colours without paint. The enclosed chamber stays warm, which is what ABS and ASA need.
It is also the printer behind our live stream, and by July 2026 it had logged more than 2,300 hours of printing. The Voron parts we sell — Galileo 2 extruder parts, Knomi faceplates and Blobifier kits — are printed on it in ABS or ASA, for the same hot chamber they will run in.
Watch it print
This machine streams while it works — see the current job layer by layer.
Watch live →